This device has been designed to measure pressures. The device measures pressure difference of ambient pressure and the pressure fed to the connection. The FDR unit has allready built-in pressure sensors for barometric pressures, but if you need to measure higher pressures, this is a proper device to use.
Basic installation:
Fix the unit firmly to the vehicle from the mounting holes using screws. Connect the sensor to any of the free auxillary channels (AUX 1-5) in the FDR. The AUX 1-3 channels are with 12-bit and 4,5 with 8-bit resolution.
The basic electrical connection can be seen in the drawing:
Technical data:
Dimensions |
50*15*12 mm |
Weight |
10 g |
Current consumption |
4 mA |
Operating voltage |
5.2-10 V |
Measuring range 1 |
0 - 1200 mbar |
Measuring range 2 |
0 - 2000 mbar |
Measuring range 3 |
0 - 7000 mbar |
|